[Logo] Air Video Forum
  [Search] Search   [Recent Topics] Recent Topics   [Hottest Topics] Hottest Topics   [Members]  Member Listing   [Groups] Back to home page 
[Moderation Log] Moderation Log   [Register] Register / 
[Login] Login 
Messages posted by: jayband
Forum Index » Profile for jayband » Messages posted by jayband
Author Message
I have one more suggestion since I install the server in my Windows Home Server. If the server reboots due to MS upgrades, I have to login to my personally account to have Air Video Server starts streaming again.

I was wondering if the server can be installed as "service"

I tried to do it manually by adding the .exe as a service. The iphone can see the server but the directory is not being listed (blank)
Is that on the latest version or it was there since 2.1.3? Maybe I didn't wait long enough...
I will try to setup the DGL-4300 again later and send you the log. Meanwhile, I remember when I looked into the remote log, I saw it get stuck into other uPnP device in the network (192.168.1.3 on my Windows Home Server), never got pass it to move on to the router (192.168.1.1)

Okay, here's a brief description of what I've found so far....

I think even my Dlink DGL-4300 router supports uPnP but I think it's not working 100%. Air Video server will fail the uPnP (under remote) test even when I enable uPnP in my router.

I bought a new Buffalo router which supports uPnP and viola it works! I tested with my iphone connected via 3G choosing the different server(s) in my LAN, router can pass the traffic along correctly.

But there is one thing I found is that Air Video will only config the router once. Say once Air Video server is up, if there is any changes in the router (usually all manufacture requires a reboot of some kind), the next time Air Video server will not work since the router lose the uPnP configuration. If there a possible for the server to issue a repeated uPnP ping to the router?

In order to get this work around, basically after the router is reboot, just reboot each Air Video Server and that will solve the problem
I have a dlink DGL-4300 and suppose to support uPnP which will automatically config the server port and it will fail Air Video remote testing. I switch to a different router (Buffalo) and everything works fine. I have 2 server streaming to internet within my LAN
My router does support uPnP but I couldn't get it to work outside the LAN
I want to stream video on the internet with 2 server running in my home. Within the LAN, there is no problem choosing between the 2 server. But I can only assign one port forwarding in my router when accessing from the internet, that leaves one server not be able to stream to another iphone.
I have 2 computers in my LAN which one of them has a dedicated 45631 port forwarded in the router. I would like to assign a different port for the second computer so my wife can use the other computer to stream/transcode in parallel.

Is there a way to change the port number in the Air Video server?
I have 2 computers in my LAN which one of them has a dedicated 45631 port forwarded in the router. I would like to assign a different port for the second computer so my wife can use the other computer to stream/transcode in parallel.

Is there a way to change the port number in the Air Video Server?
You can put me as the tester My email: jayband@gmail.com
First I want to say this is a great app, I can stream mp4, transcode mkv etc to iphone/ipod. I was wondering if the app can do rmvb transcode since rmvb can be decoded using Real alternative in FFMPEG. Most of the transcode software just need the codec to work on the input side.

Thanks
 
Forum Index » Profile for jayband » Messages posted by jayband
Go to:   
Powered by JForum 2.1.8 © JForum Team